Offshore Trolling Lures Built to Run True
Skirted lures, jet heads, chuggers, and cedar plugs from builders who fish. Set your spread and let the lures do the work.
Shop Trolling Lures
Set Your Spread with Confidence
50+ trolling lures from builders who actually fish. Fishermen-Owned Tackle Shop.
Shop the Full CollectionHow to Build a Trolling Spread That Produces
Trolling Lure FAQs
What trolling speed do these lures run best at?
Most skirted trolling lures run best between 6 and 9 knots. Jet heads and wahoo lures are designed for higher speeds — 9 to 14 knots. Cedar plugs and small feathers work well at 5-7 knots. Each product page lists the recommended speed range for that specific lure.
What size trolling lure should I use for mahi?
For dolphin (mahi-mahi), 6-8 inch skirted lures in bright colors work best. Pink/white, chartreuse, and blue/white are proven producers. Run them on 60-80 lb leader behind your short riggers or flat lines. Smaller lures in the 4-6 inch range also work well for schoolie mahi.
What lure should I use for wahoo?
Wahoo respond to dark-colored lures (black/red, black/purple) fished at 10-14 knots. Jet heads and heavy-headed lures that track straight at speed are ideal. Run them behind planers or on wire leader — wahoo have razor-sharp teeth that will cut through mono and fluoro.
How do I set up a basic trolling spread?
Start with 5 positions: two long riggers (farthest back), two short riggers or flat lines, and one shotgun (center, farthest back). Run your largest or most action-heavy lures on the long riggers. Medium lures on short riggers. Your most reliable lure goes on the shotgun — that is the position that gets bit most often.
What leader material should I use with trolling lures?
For most offshore species (mahi, tuna, marlin), use 80-130 lb monofilament or fluorocarbon leader. For wahoo, use single-strand wire or heavy fluorocarbon (200 lb+). Leader length should be 6-15 feet depending on species and water clarity. Crimped connections are more reliable than knots at these leader weights.
Can I troll these lures with natural bait?
Many of our skirted lures are designed to be trolled over ballyhoo or strip baits. The skirt provides action and color while the natural bait adds scent and a realistic profile. Rig the ballyhoo with a chin weight and pin rig, then slide the skirted lure head over the top.
Where do orders ship from?
Fast shipping from North Carolina. Rates shown at checkout.
Which lures work for marlin?
For blue and white marlin, run 10-14 inch skirted lures with heavy heads. Blue/white, green/yellow, and dark colors all produce. Position the largest lure on the long rigger and run it at 7-9 knots. Marlin typically eat from behind, so a lure with good smoke trail and bubble pattern is key.
Build Your Spread Today
50+ trolling lures in stock. Packed by a real tackle shop.
Shop Trolling Lures











