
Fast Clips Dredge Snaps by Epic Fishing Co.
Rigging dredge drops with standard snaps is slow and leaves you worried about the snap opening under pressure. Fast Clips are paperclip-style connectors that slide through the eye and lock without any moving parts to fail. No spring to corrode, no gate to open accidentally. Stainless steel construction handles saltwater and the abuse of repeated dredge deployments. Three sizes cover light teasers through heavy offshore dredge systems. The 24-count bag gives you enough clips to rig a full dredge setup with spares.
- 48 count bag of stainless steel dredge snaps
- Paperclip-style connection with no knots or tools needed
- Available in 50lb, 75lb, and 125lb test sizes
- Fastest way to rig dredge drops offshore
Rig Your Dredge in Half the Time
Standard snap swivels work fine until you are rigging 20+ drops on a dredge arm and each one takes a squeeze, click, and prayer that it does not pop open at trolling speed. Fast Clips change dredge rigging from a chore to a 30-second operation per drop.
Slide the wire through the eye, twist, done. No pliers needed. No spring mechanism to fail. The paperclip design physically cannot open under tension because the load pulls the clip tighter against itself. At $6.99 for 24 clips, a single bag rigs an entire dredge system. Keep a spare bag in your rigging kit and you never run short.
Slide the wire through the eye, twist, done. No pliers needed. No spring mechanism to fail. The paperclip design physically cannot open under tension because the load pulls the clip tighter against itself. At $6.99 for 24 clips, a single bag rigs an entire dredge system. Keep a spare bag in your rigging kit and you never run short.
Paperclip-Style Design
The looped wire design slides through any eye or ring and locks under tension. Unlike spring-loaded snaps, there is no mechanism to corrode or fail. The harder a fish pulls, the tighter the connection gets. Simple engineering that works every time.
Three Sizes for Any Setup
The 50lb clips handle light teaser strips and small dredge drops. The 75lb covers standard dredge applications. The 125lb is built for heavy offshore dredge systems pulling large squid or fish strips. Match the clip size to your dredge arm weight class.
48 Count Bags
A single dredge arm can use 8-12 clips for a full spread of drops. The 48-count bag gives you enough to fully rig two dredge setups and keep extras on hand. More clips per bag means fewer resupply runs and a lower cost per clip.
How to Use Fast Clips Dredge Snaps
1. Thread the Fast Clip wire through the eye of your dredge drop or teaser
2. Twist the clip to close the connection
3. Attach the opposite end to your dredge arm or leader
4. Pull test the connection by hand before deploying
5. Repeat for each drop on your dredge setup
6. Replace any clips that show deformation or excessive wear
Specs & Common Questions
Everything you need to know before you buy
Full Specifications +
| Brand | Epic Fishing Co. |
| Type | Dredge Snaps / Fast Clips |
| Design | Paperclip-Style Wire Connector |
| Material | Stainless Steel |
| Sizes | 50lb, 75lb, 125lb |
| Quantity | 48 per bag |
| Price | $12.99 |
What size Fast Clips do I need? +
50lb for light teasers and small dredge drops. 75lb for standard dredge applications. 125lb for heavy offshore dredge systems. If unsure, start with 75lb, which covers most setups. Our dredge rigging guide covers hardware sizing in detail.
Can these open under load? +
No. The paperclip design pulls tighter against itself under tension. There is no spring or gate to fail. This is why Fast Clips are preferred over standard snap swivels for dredge applications where multiple connections are under constant trolling pressure. Browse our Dredge Flapz teasers for drops that pair well with these clips.
How many clips do I need for a dredge? +
A typical dredge arm uses 8-12 clips depending on the number of drops. The 24-count bag covers one arm with spares, or two lighter setups. Our dredge setup guide covers arm configuration.
Are these just for dredges? +
The clips work anywhere you need a fast, secure connection that cannot open. Anglers also use them for teaser chains, daisy chains, and quick-change leader connections. See our trolling spread guide for more rigging applications.
Will stainless steel corrode in saltwater? +
Stainless steel resists salt corrosion far better than brass or plated metals. Rinse the clips with fresh water after each trip and they last indefinitely. At under $0.30 per clip, you can replace them at any sign of wear without hesitation. Browse more stainless hardware in our ball bearing swivels.
Do I need pliers to attach these? +
No. Fast Clips attach by hand. Slide the wire through the eye, twist to close. No tools required, which makes dredge rigging faster and easier, especially on a rocking boat. Our dredge guide shows the technique.
Can I use these instead of snap swivels? +
For dredge and teaser applications, Fast Clips are better than snap swivels because they cannot open accidentally. For trolling lures where you need swivel rotation, use a proper ball bearing swivel instead. Each connector type has its purpose.